TinyPICO TP-01

B.B. Link Adapter
1

Hello,

I flashed my TinyPICO with the Mac version of the Arduino IDE 2.3.3 and I got what looked like it downloaded to work.

Leaving...
Hard resetting via RTS pin...

Unfortunately, the amber LED never came on indicating the TinyPICO reset and rebooted. When I removed the USBC cable and reapplied it would not come out of the state it was stuck in. I tried two more times to flash the board with no change.

It did say Installed ArduinoQueue: 1.2.5
FreeRTOS:11.0.1-5
TinyPICO Helper Library:1.4.0
esp32.2.0.14

I am sure I missed something so please let me know what I can do to get this working.

If you need anything else please let me know to get this working.

Tim KM4ESU

2

Tim, could you go to https://github.com/islandmagic/bb-link/issues and open an issue? Please include the output from the IDE console when you flash, as well as what you see on the Serial Monitor after the board reset.

3

George,

I put an issue on your get hub site.

Thank you,
Tim KM4ESU